Gianfranco Genta

• Criticalities of iterative calibration procedures for indentation testing machines in the nano-range
  Proceeding
  

  Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio
  In: European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 20th International Conference and Exhibition, EUSPEN 2020
  euspen
  20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020
  pp.4

• Planning offline inspection strategies in low-volume manufacturing processes
  Article
  

  Verna, E.; Genta, G.; Galetto, M.; Franceschini, F.
  QUALITY ENGINEERING
  Taylor and Francis Inc.
  Vol.32 pp.16 (pp.705-720) ISSN:0898-2112 DOI:10.1080/08982112.2020.1739309

• Accurate estimation of prediction models for operator-induced defects in assembly manufacturing processes
  Article
  

  Galetto, M.; Verna, E.; Genta, G.
  QUALITY ENGINEERING
  Taylor and Francis Inc.
  Vol.32 pp.19 (pp.595-613) ISSN:0898-2112 DOI:10.1080/08982112.2019.1700274

• Designing quality inspection in short-run assembly processes of wrapping machines
  Proceeding
  

  Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio; Franceschini, Fiorenzo
  In: Titolo volume non avvalorato
  The Portuguese Association for Quality (APQ) and The European Organization for Quality (EOQ) (PORTOGALLO)
  EOQ Congress 2019 - Rediscovering quality (Lisbona (Portogallo)) 23-24 Ottobre 2019
  pp.1

• Assessment of heat treatment effect on AlSi10Mg by selective laser melting through indentation testing
  Proceeding
  

  Maculotti, G.; Genta, G.; Lorusso, M.; Galetto, M.
  KEY ENGINEERING MATERIALS
  In: Surface Modification Technologies: 33rd Surface Modification Technologies Conference (SMT 33)
  Trans Tech Publications Ltd (SVIZZERA)
  33rd Surface Modification Technologies Conference (SMT 33)
  Vol.813 pp.7 (pp.171-177) ISSN:1662-9795 ISBN:9783035715255 DOI:10.4028/www.scientific.net/KEM.813.171

• Comparison of calibration methods for nano-indentation testing machines
  Proceeding
  

  Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio
  In: Atti del XIV Convegno dell'Associazione Italiana Tecnologie Manifatturiere
  AITeM
  XIV Convegno dell'Associazione Italiana Tecnologie Manifatturiere (Padova) 9-11 Settembre 2019
  pp.10 (pp.1-10)

• Designing offline inspection strategies for Selective Laser Melting Additive Manufacturing processes
  Proceeding
  

  Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio; Franceschini, Fiorenzo
  In: Titolo volume non avvalorato
  Associazione Italiana Tecnologie Manifatturiere (ITALIA)
  XIV Convegno dell’Associazione Italiana Tecnologie Manifatturiere (Padova (Italia)) 09-11 Settembre 2019
  pp.10

• Indentation modulus at the macro-scale level measured by Brinell and Vickers indenters by using the primary hardness standard machine at INRiM
  Article
  

  Schiavi, A.; Origlia, C.; Germak, A.; Barbato, G.; Maizza, G.; Genta, G.; Cagliero, R.; Coppola, G.
  ACTA IMEKO
  International Measurement Confederation (IMEKO)
  Vol.8 pp.10 (pp.3-12) ISSN:0237-028X DOI:10.21014/acta_imeko.v8i1.650

• Uncertainty evaluation in calibration of low-cost digital MEMS accelerometers for advanced manufacturing applications
  Article
  

  Galetto, M.; Schiavi, A.; Genta, G.; Prato, A.; Mazzoleni, F.
  CIRP ANNALS
  Elsevier USA
  Vol.68 pp.4 (pp.535-538) ISSN:0007-8506 DOI:10.1016/j.cirp.2019.04.097

• Monte Carlo estimation of calibration uncertainty for Instrumented Indentation testing machines
  Proceeding
  

  Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio
  In: Mathematical and Statistical Methods for Metrology
  itENBIS and INRIM
  Mathematical and Statistical Methods for Metrology (Torino (ITA)) 30-31 May 2019
  pp.2 (pp.14-15)

Total: 150