Gianfranco Genta

• Automated quality control by AI-driven visual inspection techniques in the food processing industry
  Proceeding
  

  Piovano, Alberto; Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio
  PROCEDIA CIRP
  In: Titolo volume non avvalorato
  Elsevier
  20th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME '26) (Ischia (Italy)) 8-10 July 2026
  pp.6 ISSN:2212-8271

• Multi-objective optimization of a sterilization process in a fruits and vegetables processing industry
  Proceeding
  

  Piovano, Alberto; Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio
  PROCEDIA CIRP
  In: Titolo volume non avvalorato
  Elsevier
  19th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME 25) (Ischia (Italy)) 16-18 July 2025
  pp.6 ISSN:2212-8271

• Multi-Scenario Decision Framework for AI Model Selection in Food Visual Inspection
  Article
  

  Piovano, Alberto; Verna, Elisa; Cela, Nazarena; Torri, Luisa; Genta, Gianfranco; Galetto, Maurizio
  JOURNAL OF FOOD ENGINEERING
  Elsevier
  Vol.422 pp.16 (pp.1-16) ISSN:0260-8774 DOI:10.1016/j.jfoodeng.2026.113253

• Local hardness variation in Ti5553 machining chips measured by nanoindentation
  Proceeding
  

  Tunesi, Michele; Wagner, Vincent; Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio
  In: Proceedings of the 25th international conference of the Metrology and Properties of Surfaces combining Structured & Freeform Surfaces
  EUSPEN
  Metrology and Properties of Surfaces incorporating Structured & Freeform Surfaces
  pp.2 (pp.46-47)

• Development of definition and measurement methodology for hardness indentations of Brinell, Vickers and Knoop
  Proceeding
  

  Menelao, Febo; Kuzu, Cihan; Genta, Gianfranco; Maculotti, Giacomo; Tunesi, Michele; Prato, Andrea; Hiti, Miha; Franco Lidia Germak, Alessandro
  In: Proceedings of the IMEKO TC3, TC5, TC16, TC20, TC22 Joint Conference 2026 & The 3rd International Conference on Dynamic Measurement
  IMEKO
  IMEKO TC3, TC5, TC16, TC20, TC22 Joint Conference 2026 & The 3rd International Conference on Dynamic Measurement
  pp.5 (pp.325-329)

• Subsystem-oriented condition monitoring for connected vehicles using unlabelled data
  Proceeding
  

  Puttero, Stefano; Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio
  In: Proceedings book of the 7th International Conference on Quality Engineering and Management, 2026
  International Conference on Quality Engineering and Management (PORTOGALLO)
  7th International Conference on Quality Engineering and Management (ICQEM 2026) (Lisbon (PT)) 2-3 July, 2026
  pp.10 (pp.368-377) ISBN:9789895491131

• A Data-Driven Health Indicator for Condition Monitoring of Electric Vehicles
  Proceeding
  

  Puttero, Stefano; Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio
  In: Titolo volume non avvalorato
  ENBIS
  ENBIS Spring Meeting 2026 (Granada) 28-29 Maggio 2026
  pp.2

• Metrological properties of thin and ultra-thin coating thickness measurement by nanoindentation
  Article
  

  Maculotti, Giacomo; Ribotta, Luigi; Genta, Gianfranco; Galetto, Maurizio
  MEASUREMENT
  Elsevier
  Vol.281 pp.16 ISSN:0263-2241 DOI:10.1016/j.measurement.2026.121993

• Automatic detection and segmentation of indentations and tribological marks by traceable machine vision system
  Proceeding
  

  Genta, Gianfranco; Maculotti, Giacomo; Perrone, Matteo; Galetto, Maurizio
  PROCEDIA CIRP
  In: Procedia CIRP
  Elsevier B.V.
  18th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2024 (ita) 2024
  Vol.138 pp.6 (pp.1145-1150) ISSN:2212-8271 DOI:10.1016/j.procir.2026.01.197

• Definition of a nanoindentation-based methodology to optimize process parameters of coating deposition on silicon wafer
  Proceeding
  

  Galetto, Maurizio; Genta, Gianfranco; Maculotti, Giacomo; Giorio, Lorenzo; Marchiandi, Giovanni
  PROCEDIA CIRP
  In: Procedia CIRP
  Elsevier B.V.
  18th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2024 (ita) 2024
  Vol.138 pp.6 (pp.1055-1060) ISSN:2212-8271 DOI:10.1016/j.procir.2026.01.182

Total: 175