Gianfranco Genta

• Die wear reduction by multifactorial Design of Experiments applied to forging simulations
  Proceeding
  

  Alessio, Alessandro; Antonelli, Dario; Doglione, Roberto; Genta, Gianfranco
  PROCEDIA CIRP
  In: Titolo volume non avvalorato
  Elsevier
  ICME
  Vol.112 pp.6 (pp.424-429) ISSN:2212-8271 DOI:10.1016/j.procir.2022.09.031

• Non-Contact Articulated Robot-Integrated Gap and Flushness Measurement System for Automobile Assembly
  Article
  

  Kholkhujaev, J; Maculotti, G; Genta, G; Galetto, M; Inoyatkhodjaev, J
  IEEE ACCESS
  IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
  Vol.10 pp.14 (pp.86528-86541) ISSN:2169-3536 DOI:10.1109/ACCESS.2022.3199066

• A methodology for task-specific metrological characterization of low-cost 3D camera for face analysis
  Article
  

  Maculotti, G.; Ulrich, L.; Olivetti, E. C.; Genta, G.; Marcolin, F.; Vezzetti, E.; Galetto, M.
  MEASUREMENT
  Elsevier
  Vol.200 pp.11 ISSN:0263-2241 DOI:10.1016/j.measurement.2022.111643

• Challenges and opportunities of collaborative robots for quality control in manufacturing: evidences from research and industry
  Proceeding
  

  Verna, Elisa; Puttero, Stefano; Genta, Gianfranco; Galetto, Maurizio
  In: Proceedings book of the 5th International Conference on Quality Engineering and Management, 2022
  International Conference on Quality Engineering and Management (PORTOGALLO)
  5th International Conference on Quality Engineering and Management (ICQEM22) (Braga, Portugal) July 14-15, 2022
  pp.28 (pp.235-262) ISBN:9789895491117

• Defect prediction for assembled products: a novel model based on the structural complexity paradigm
  Article
  

  Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio; Franceschini, Fiorenzo
  INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY
  Springer
  Vol.120 pp.22 (pp.3405-3426) ISSN:0268-3768 DOI:10.1007/s00170-022-08942-6

• Economic impact of quality inspection in manufacturing: A proposal for a novel cost modeling
  Article
  

  Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio; Franceschini, Fiorenzo
  PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART B, JOURNAL OF ENGINEERING MANUFACTURE
  SAGE Publishing
  Vol.236 pp.10 (pp.1508-1517) ISSN:0954-4054 DOI:10.1177/09544054221078090

• Defects-per-unit control chart for assembled products based on defect prediction models
  Article
  

  Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio; Franceschini, Fiorenzo
  INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY
  Springer
  Vol.119 pp.12 (pp.2835-2846) ISSN:0268-3768 DOI:10.1007/s00170-021-08157-1

• Correction to: Performance measurement for offline inspections under variable interactions and inspection errors in low-volume production
  Article
  

  Verna, E.; Genta, G.; Galetto, M.; Franceschini, F.
  PRODUCTION ENGINEERING
  Springer Science and Business Media Deutschland GmbH
  Vol.16 pp.1 ISSN:0944-6524 DOI:10.1007/s11740-021-01080-0

• Uncertainty-based comparison of conventional and surface topography-based methods for wear volume evaluation in pin-on-disc tribological test
  Article
  

  Maculotti, G.; Goti, E.; Genta, G.; Mazza, L.; Galetto, M.
  TRIBOLOGY INTERNATIONAL
  Elsevier Ltd
  Vol.165 pp.18 ISSN:0301-679X DOI:10.1016/j.triboint.2021.107260

• Performance measurement for offline inspections under variable interactions and inspection errors in low-volume production
  Article
  

  Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio; Franceschini, Fiorenzo
  PRODUCTION ENGINEERING
  Springer
  Vol.16 pp.16 (pp.157-172) ISSN:0944-6524 DOI:10.1007/s11740-021-01077-9

Total: 150