Giacomo Maculotti

• Single-step calibration method for nano indentation testing machines
  Article
  

  Galetto, Maurizio; Genta, Gianfranco; Maculotti, Giacomo
  CIRP ANNALS
  Elsevier
  Vol.69 pp.4 (pp.429-432) ISSN:0007-8506 DOI:10.1016/j.cirp.2020.03.015

• Criticalities of iterative calibration procedures for indentation testing machines in the nano-range
  Proceeding
  

  Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio
  In: European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 20th International Conference and Exhibition, EUSPEN 2020
  euspen
  20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020
  pp.4

• Assessment of heat treatment effect on AlSi10Mg by selective laser melting through indentation testing
  Proceeding
  

  Maculotti, G.; Genta, G.; Lorusso, M.; Galetto, M.
  KEY ENGINEERING MATERIALS
  In: Surface Modification Technologies: 33rd Surface Modification Technologies Conference (SMT 33)
  Trans Tech Publications Ltd (SVIZZERA)
  33rd Surface Modification Technologies Conference (SMT 33)
  Vol.813 pp.7 (pp.171-177) ISSN:1662-9795 ISBN:9783035715255 DOI:10.4028/www.scientific.net/KEM.813.171

• Comparison of calibration methods for nano-indentation testing machines
  Proceeding
  

  Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio
  In: Atti del XIV Convegno dell'Associazione Italiana Tecnologie Manifatturiere
  AITeM
  XIV Convegno dell'Associazione Italiana Tecnologie Manifatturiere (Padova) 9-11 Settembre 2019
  pp.10 (pp.1-10)

• Multi-sensor data fusion for the characterisation of laser cladded cermet coatings
  Proceeding
  

  Maculotti, G.; Senin, N.; Oyelola, O.; Galetto, M.; Clare, A.; Leach, R.
  In: European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019
  euspen
  19th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2019 (Bilbao, Spain) 2019
  pp.4 (pp.260-263) ISBN:9780995775145

• Residual flatness and scale calibration for a point autofocus surface topography measuring instrument
  Article
  

  Maculotti, Giacomo; Feng, Xiaobing; Su, Rong; Galetto, Maurizio; Leach, Richard
  MEASUREMENT SCIENCE & TECHNOLOGY
  IOP Science
  Vol.30 pp.15 ISSN:0957-0233 DOI:10.1088/1361-6501/ab188f

• Monte Carlo estimation of calibration uncertainty for Instrumented Indentation testing machines
  Proceeding
  

  Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio
  In: Mathematical and Statistical Methods for Metrology
  itENBIS and INRIM
  Mathematical and Statistical Methods for Metrology (Torino (ITA)) 30-31 May 2019
  pp.2 (pp.14-15)

• Instrumented Indentation Test in the Nano‑range: Performances Comparison of Testing Machines Calibration Methods
  Article
  

  Galetto, Maurizio; Maculotti, Giacomo; Genta, Gianfranco; Barbato, Giulio; Levi, Raffaello
  NANOMANUFACTURING AND METROLOGY
  Springer
  Vol.2 pp.9 (pp.91-99) ISSN:2520-8128 DOI:10.1007/s41871-019-00035-5

• Instrumented Indentation Test: Contact Stiffness Evaluation in the Nano‑range
  Article
  

  Maculotti, Giacomo; Genta, Gianfranco; Lorusso, Massimo; Pavese, Matteo; Ugues, Daniele; Galetto, Maurizio
  NANOMANUFACTURING AND METROLOGY
  Springer
  Vol.2 pp.10 (pp.16-25) ISSN:2520-8128 DOI:10.1007/s41871-018-0030-y

• Effect of contact stiffness and machine calibration in nano-indentation testing
  Proceeding
  

  Genta, Gianfranco; Maculotti, Giacomo; Barbato, Giulio; Levi, Raffaello; Galetto, Maurizio
  In: Procedia CIRP
  Elsevier (PAESI BASSI)
  6th CIRP Global Web Conference “Envisaging the future manufacturing, design, technologies and systems in innovation era” (Shantou (Cina)) 23-25 ottobre 2018
  Vol.78 pp.5 (pp.208-212) DOI:10.1016/j.procir.2018.08.313

Total: 64