Maurizio Galetto

• Uncertainty-based comparison of conventional and surface topography-based methods for wear volume evaluation in pin-on-disc tribological test
  Article
  

  Maculotti, G.; Goti, E.; Genta, G.; Mazza, L.; Galetto, M.
  TRIBOLOGY INTERNATIONAL
  Elsevier Ltd
  Vol.165 pp.18 ISSN:0301-679X DOI:10.1016/j.triboint.2021.107260

• Performance measurement for offline inspections under variable interactions and inspection errors in low-volume production
  Article
  

  Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio; Franceschini, Fiorenzo
  PRODUCTION ENGINEERING
  Springer
  Vol.16 pp.16 (pp.157-172) ISSN:0944-6524 DOI:10.1007/s11740-021-01077-9

• Gaussian process regression‐based detection and correction of disturbances in surface topography measurements
  Article
  

  Maculotti, Giacomo; Genta, Gianfranco; Quagliotti, Danilo; Galetto, Maurizio; Hansen, Hans N.
  QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL
  Wiley
  Vol.38 pp.18 (pp.1501-1518) ISSN:0748-8017 DOI:10.1002/qre.2980

• Analysis of residual plastic deformation of blanked sheets out of automotive aluminium alloys through hardness map
  Article
  

  Maculotti, G; Bonù, S; Bonù, L; Cagliero, R; Genta, G; Marchiandi, G; Galetto, M
  IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
  IOP Publishing
  Vol.1193 pp.8 ISSN:1757-8981 DOI:10.1088/1757-899X/1193/1/012102

• Accurate coil springs axial and transverse stiffness measurements with multicomponent testing machines
  Proceeding
  

  Prato, A.; Genta, G.; Galetto, M.; Mazzoleni, F.; Facello, A.; Germak, A.
  In: 2021 IEEE International Workshop on Metrology for Automotive, MetroAutomotive 2021 - Proceedings
  Institute of Electrical and Electronics Engineers Inc. (STATI UNITI D'AMERICA)
  1st IEEE International Workshop on Metrology for Automotive, MetroAutomotive 2021 (Virtual Conference) July 1-2, 2021
  pp.5 (pp.88-92) ISBN:9781665439060 DOI:10.1109/MetroAutomotive50197.2021.9502872

• Towards large-scale calibrations: A statistical analysis on 100 digital 3-axis MEMS accelerometers
  Proceeding
  

  Prato, A.; Mazzoleni, F.; Pennecchi, F. R.; Genta, G.; Galetto, M.; Schiavi, A.
  In: 2021 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT 2021 - Proceedings
  Institute of Electrical and Electronics Engineers Inc. (STATI UNITI D'AMERICA)
  2021 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT 2021 (Virtual Conference) June 7-9, 2021
  pp.5 (pp.578-582) ISBN:9781665419802 DOI:10.1109/MetroInd4.0IoT51437.2021.9488465

• Uncertainty estimation by bootstrap sampling of area shape function in nano-indentation testing
  Proceeding
  

  Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio
  In: Mathematical and Statistical Methods for Metrology MSMM 2021
  INRIM
  Joint Virtual Workshop of ENBIS and MATHMET - Mathematical and Statistical Methods for Metrology MSMM 2021 (Torino (ITA)) 31 May - 1 June 2021
  pp.2 (pp.69-70)

• Measurement of respirable crystalline silica concentration by X-ray diffraction: Evaluation of metrological performances
  Article
  

  Nebbia, R.; Genta, G.; Zuliani, P.; Patrucco, M.; Pira, E.; Galetto, M.
  MEASUREMENT
  Elsevier B.V.
  Vol.183 pp.10 ISSN:0263-2241 DOI:10.1016/j.measurement.2021.109839

• Effect of track geometry on the measurement uncertainty of wear in pin-on-disc tribological test
  Proceeding
  

  Maculotti, G.; Goti, E.; Genta, G.; Marchiandi, G.; Mura, A.; Mazza, L.; Galetto, M.
  In: Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021
  euspen
  21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021 2021
  pp.4 (pp.293-296)

• Inspection planning by defect prediction models and inspection strategy maps
  Article
  

  Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio; Franceschini, Fiorenzo
  PRODUCTION ENGINEERING
  Springer
  Vol.15 pp.19 (pp.897-915) ISSN:0944-6524 DOI:10.1007/s11740-021-01067-x

Total: 235